Tips for Maintaining Your Gold Plated Jewellery

Eternity Ring Gold plated on Sterling Silver

Here at Mirabelle we do a lot of gold plated jewellery on Brass plated with 22 carat gold at about 1 micron plate both on Brass and Sterling Silver

We use gold plated on sterling silver for Earrings , while our pendants are mostly gold plated on Brass as it is less costly and the plate holds better on Brass as it blends nicely over time , it gives it then a nice patina , kind of Vintage like .

we do some stones on sterling silver gold plated due to the stone quality as some stones are difficult to set in Brass like opals.

What is Micron plated ? what does that mean ?

The thicker the plating, the longer it lasts. Thin plating (less than 0.5 microns) wears off quickly, exposing the base metal. Thicker plating (1 micron or more) ensures better protection against wear and tear.

How to care for Gold plated Jewellery on Brass , Copper or sterling Silver

1. Avoid Abrasives: Clean gently with a soft cloth; avoid harsh chemicals or scrubbing.

2. Store Separately: Keep plated jewellery in a soft pouch to prevent scratches.

3. Remove for Activities: Take off jewellery during exercise, cleaning, or swimming to extend the plating’s life.

4. Re-Plate as Needed: Over time, even high-quality plating may wear off, so consider re-plating to restore its shine.

We also use Ecoating on some of our jewellery especially our chains

What is Ecoating?

E-coating, or electrocoating, is a sophisticated method used to apply a protective coating to metal jewelry. This process involves immersing the jewelry pieces in a water-based solution containing electrically charged paint particles.

The benefits are

Enhanced durability: The e-coat adds a tough, protective barrier that guards the gold plating from scratches and wear.

Coverage: Provides a consistent and even thickness, even on complex shapes, because the entire piece is submerged in the solution.

R